HB-CRE-160D is a CE Certified electric crimper for the CR20XX series coin cells such as CR2016, CR2025, and CR2032. It is an ideal tool designed to be operated both within and outside of a glove box. This crimper can be used under Argon gas for half cell testing. |
Power | 110 - 240V AC 50/60Hz for univeral use |
24V DC motor with reducing gear, 15W |
Can be used inside argon gas glovebox |
Die Set & Compatibility | Assembling dies for crimping CR2032, CR2025, & CR2016 coin cells. |
100 pcs Coin cell cases (MTI's CR2032 cases) are included in the package for testing and immediate use |
Pressure | The pressure applied to seal the cell case is pre-set to a constant pressure at about 800 kg before shipping. |
Pressure adjustment knob at top can be used to adjust pressure applied on the negtive cap of cell to prevent case deformation. |
You may use a load cell to calibrate pressure ( click Pic below to order at extra cost ) |
Product Dimensions | 220mm(L) x 130mm(W) x 430mm(H) |
Compliance | CE Certified |
Warranty | One Year limited warranty with lifetime support (rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty) |
Maintenance Notes & Warnings | Electrolytes are highly corrosive materials, therefore the die set must be cleaned with alcohol after each use to avoid corrosion |
The PTFE die (found at the top die) ejects the cell casing after crimping via spring loaded pressure.. Do NOT over tighten the pressure adjustment knob to avoid damaging this PTFE die. |
To set the proper pressure on the die, loosen the knob all the way until the spring compression no longer be felt. Then start tightening the knob and stop turning it once the spring compression is felt. |
This will prevent the PTFE die from becoming deformed by being subjected to excessive pressure. |
Optional | Protection shield / enclosure with safety interlock is available at extra $1200 ( please click Personalization to add this option and click the bottom left picture to see details ) |
|
Net Weight | 25 kg (55 lbs) |
Shipping Weight | 45 kg (100 lbs) |